The latest generation of nesting

This machine is the latest generation of SCM nesting solutions and is very suitable for flexible mass production. It is possible to cut parts of various forms and sizes on a single CNC machining center, and even parts of shapes. The production level of this kind of processing was once considered unimaginable.

As a model of the Morbidelli m series, Morbidelli m200 is widely regarded as the benchmark of CNC machining centers. Its sturdy structure, 250mm workpiece transport, five-axis Prisma KT and Morbidelli m200 Flexmatic plane can handle not only various panel processing, but also solid wood processing

Thanks to the X-POD suction cup and the JQX (Just Quality eXtreme) five-axis electric spindle, all processing can be completed without removing the spoil board panel. This greatly reduces the setup time of the machine. 

Thanks to the new labeling machine in the machine compartment, the labeling of a single panel is automatically performed before processing the panel (even if it is a stand-alone version), which optimizes the cycle time. 

With the new X-Vacuum system, even the smallest workpieces can be evacuated during processing. This system allows dynamic vacuum to be activated to concentrate it on the workbench area being processed. 

SCM technology is optimized for flexible mass production

The processing center can be configured according to the requirements of the enterprise. Morbidelli x200/x400 can be used in smooth, neutral or dynamic modes to instantly personalize the program application.

All-in-one machining center for panel drilling and wiring

The integrated technological revolution does not end there-Morbidelli m100 continues to bring surprises and development, adopting a new compact solution, making the five-axis machine tool the smallest five-axis machine on the market. SCM stated that it offers all the advantages of the Morbidelli m series in an ultra-compact solution.

SCM stated that the Morbidelli m series has become the benchmark for CNC machining centers worldwide. Due to its sturdy structure, 250 mm workpiece transport, five-axis Prisma KT and Morbidelli m200 Flexmatic planes can handle not only various panel processing, but also solid wood processing.

Panel drilling, wiring and edge banding machining center

The impressive Morbidelli p800 can machine the most complex parts in just a few steps

This is an uncompromising solution for SCM, which combines traditional operations performed on machining centers with the edge processing capabilities of even the most difficult-to-machine shapes. The combination between the MATIC working plane and the innovative operating unit means that Morbidelli p800 can machine even the most complex workpieces in a few steps. SCM stated that from 0-360° edge banding to inclined edge banding, through the automatic replacement of the pressure roller, this machining center has no boundaries.

SCM starts a new era of drilling with Morbidelli ux200

Absolute quality and superior accuracy, combined with unparalleled productivity and ease of use-these are the advantages of SCM's new series of CNC drilling solutions, the supplier said. 

Morbidelli ux200 is designed to meet the growing demand for mass production and integrated production. This enables manufacturers to meet the special requirements of any particular customer without affecting the efficiency of industrial production. 

Every detail of this machine has been carefully designed to perform all necessary processing operations with efficient, high-quality and advanced technology. 

A machine that perfectly combines flexibility and high productivity

Thanks to four independent operating units (two upper parts and two lower parts), any workpiece can be processed in a few steps. In addition, the possibility of processing two overlapping parts at the same time also means that the production of symmetrical parts can be doubled.

A notable feature of Morbidelli ux200d is the unique positioning unit with dual variable axis, which can be adjusted according to the hole distance. 

The available features of the entire series include dual automatic tool changers for upper and lower electro-spindles (for simultaneous machining of opposite sides of the panel), and tools for Clamex custom joints.

Thanks to the JQX (Just Quality eXtreme) five-axis direct drive spindle head, excellent finishing is achieved, and vibration-free even when a large amount of material is removed at high speed-and a high-performance drill with RO.AX (rotating axis) Spindle technology) spindle with speed up to 8000rpm

Molding fixture optimizes cycle time

The design of the new fixture can even perform drilling and milling operations inside the clamping area. Maestro CNC software is responsible for optimizing all operations to minimize fixture switching.

Perfect drilling-Ro.AX spindle

The latest RO.AX technology (Rotating Axial Spindle Technology) can ensure zero clearance during machining-the most efficient spindle on the market with a speed of up to 6000rpm. SCM stated that the reduced maintenance costs attest to the robustness of the drill bit, which is five times lower than most other machine manufacturers.

Highly advanced computer software offers other advantages. The software controls the drilling cycle and the ability to automatically load panels of any size. In addition, in the case of double-panel machining, Maestro CNC can automatically create the operation of the second workpiece-a program, but there are multiple ways of working!

Morbidelli ux200d is highly versatile and can be operated as a standalone machine or as an integrated part of a production line, equipped with various types of workpiece conveyors and loading/unloading systems. 

Access the e-magazine, sign up for the newsletter

Read the article only for registered users

Registered magazine, print or digital version

Edit submission. Publish your work

Advertise with us, print or digital

Media pack, download media pack

Sign up for a free listing!

Upgrade your profile and add photos, videos, maps, social media links, PDF uploads and contacts

Designers and manufacturers: Publish your products to reach retailers around the world. Retailer? Sign up for the newsletter with the latest news, features, and products.

© 2013-2021 Media 66 Ltd / Gearing Media Group Ltd / www.furnitureproduction.net / Furniture & Joinery Production / All rights reserved